43
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Keep the packaging for your X10. It should be used to protect the
machine during transport.
In order to protect the X10 from frost during transport, the system
must be emptied.
Precondition:The start screen is displayed.
T Remove the milk pipe from the dual spout.
T Place one receptacle under the dual spout and another
under the hot-water spout.
T Touch ‘P’.
‘Maintenance status’
T Move your finger across the display until ‘Machine settings’
is displayed in the centre.
T Touch ‘Machine settings’.
‘Switch off after’
T Move your finger across the display until ‘Empty system’ is
displayed in the centre.
T Touch ‘Empty system’.
‘Empty system’ / ‘Remove the water tank’
T Remove and empty the water tank.
T Touch ‘Next’.
Water and steam will continue to be discharged from the
dual spout and the hot-water spout until the system is
empty.
Your X10 is switched off.
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.
Transport/ Emptying the
system
Disposal