EasyManua.ls Logo

JVA ZM1 - Earth Loop Monitoring; Noise and Interference; PC Control; Web Server

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JVA ELECTRIC FENCE SYSTEMS
11
Description
4.18 Earth Loop Monitoring
The Z114 has two fence earth terminals. If the earth monitoring facility is not required,

on how to wire for earth loop monitoring are in Section 5.3.
4.19 Noise and Interference
          
processors. The most likely cause of such noise is the high voltage output from
the unit itself. In the event of erratic behaviour, check that the high voltage wiring is


necessary.
4.20 PC control
A standard Windows PC may be used to control and monitor a group of Z series
energizers. Ask your JVA distributor for a demonstration of Perimeter Patrol
software. Z series energizers can be connected to a PC using either a serial data
adaptor, such as the PAE223 or TCP/IP using a PAE212.
4.21 Web Server
Another alternative to remotely controlling JVA Z series energizers is to use the
          
controlled and monitored via a web browser from any internet connected device
anywhere in the world.

Table of Contents

Other manuals for JVA ZM1

Related product manuals