JVC A-K100 - Page 5

| A-K100
3-(5) Power transistor replacement
1. Remove the metal cover (refer to 3-(1)). 4. Remove 4 screws from the leaf spring located on
2. Remove 2 screws from the main P. C. Board. the heatsink and remove the heatsink.
3. Remove the AC outlet (remove 2 screws frorn the 5. Remove 11 screws from the bottom plate (6 for
rear panel). front side and 5 for rear side).
Power Transistors
Heatsink
NOTE:
Reassemble in the reverse order to removal. Do not forget
to engage the protruded portions of the main P. C. Board
with the grooves in the heatsink.
Fig. 5
(No 2736) 1-4