JVC AV 20D202 - Bbe; Return; Input

Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124,
press 100+, 2 (two), 4 (four).
100+ Button
Return+
Input
Selects the signal input source for the television: TV (for Antenna or Cable) or Video1, 2, or 3 for
video devices like VCR’s, DVD players, or camcorders.
INPUT
TV VIDEO-1 VIDEO-2
VIDEO-3
BBE (Available on AV-27D302 and AV-27D202 only)
BBE high definition audio adds natural, clear and extraordinary sound quality to any program. Turn
BBE On or Off using the BBE button.
BBE ON OFF
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH- buttons.
R
ETURN
+ and hold for three seconds
The channel currently active has been programmed as your Return+ channel. Now scan through
the channels using the C
HANNEL+/- buttons
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the R
ETURN+ button for three seconds. The message
“RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel Return+.
RETURN CHANNEL
PROGRAMMED !
• BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from BBE Sound, Inc. under
USP 4638258, 4482866 and 5510572. For Canada, licensed from BBE Sound, Inc. BBE is a
registered trademark of BBE Sound, Inc.
NOTE:
Button Functions
41
FD mini-IB 1/16/01 3:33 PM Page 41