39
AUDIO menu
Item
Contents
DIGITAL AUDIO OUTPUT
Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY:
When connecting to audio equipment which is compatible with only linear PCM
signals.
DOLBY DIGITAL/PCM:
When connecting to a Dolby Digital decoder or an amplifier with
built-in Dolby Digital decoder.
STREAM/PCM:
When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in DTS/
MPEG Audio decoder.
DOWN MIX
This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM
ONLY.”
DOLBY SURROUND:
Select this when connecting to a surround decoder.
STEREO:
Select this when connecting to a stereo receiver, MD player, TV, etc.
D. RANGE COMPRESSION
You can enjoy a powerful sound at a low volume level while playing Dolby Digital software.
AUTO:
Select to apply the compression only to multi-channel encoded audio (except for 1-channel
and 2-channel sources).
ON:
Select this to always apply the compression.
OTHERS menu
Item
Contents
RESUME
You can select Resume.
ON:
The System resumes playback from the position where playback has been stopped (not applicable
for CD).
OFF:
Resume is deactivated.
ON SCREEN GUIDE
Activate or deactivate the on-screen guide.
ON:
Activate the on-screen guide.
OFF:
Deactivate the on-screen guide.
DivX REGISTRATION
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded, the System’s
Registration Code is overwritten for copyright protection.
DX-U6[U].book Page 39 Monday, March 26, 2007 2:22 PM
To Next Page
Loading...
