JVC CA-EX90 - Page 47

47 CA-EX90
Recording CD audio onto a cassette tape (1)
1 Prepare the cassette deck.
Load a tape for use in recording in the cassette deck.
2 Prepare the CD player.
Load the CD to be recorded in the CD player. Program
tracks as required.
3 Press CD REC of the cassette deck.
Synchronized recording starts.
• To stop recording, press & /CANCEL on the CD player
or 7 on the casse the deck.
• Refer also to the instruction manual of the cassette
deck.
Recording CD or MD audio onto a cassette tape (2)
1 Prepare the cassette deck.
Load a tape for use in recording in the cassette deck.
2 Prepare the CD player or MD recorder.
To record CD: Load the CD to be recorded in the CD
player and program tracks as required.
To record MD: Load the MD to be recorded in the MD
recorder and program tracks as required.
3 Press REC PAUSE of the cassette deck.
The cassette deck enters the recording standby mode.
4 Press ‹/8 of the CD player or MD recorder.
Synchronized recording starts.
• Refer also to read the instruction manuals of the other
components.
CD RECREC PAUSE
CD RECREC PAUSE
/CANCEL
EN41-52.CA-EX90[J]/1 98.6.8, 8:28 AM47