46
Menu Item Contents
PICTURE
PICTURE SOURCE
You can obtain optimal picture quality by selecting the source type of the
video source.
AUTO: Normally, select this option. The System recognizes the picture
type (film or video source) of the current picture according to its
information.
FILM: For a film source picture.
VIDEO: For a video source picture.
SCREEN SAVER You can set the screen saver function (ON or OFF). If no operation is
done for about 5 minutes, the TV screen dims.
FILE TYPE
You can select the file type to play.
AUDIO: To play MP3/WMA/WAV files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1/MPEG-2/DivX files.
AUDIO
DIGITAL AUDIO OUTPUT
Set this item correctly when using the OPTICAL DIGITAL OUTPUT
terminal on the rear.
PCM ONLY: When connecting to audio equipment which is compatible
with only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or
an amplifier with a built-in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with
a built-in DTS decoder.
DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO
OUTPUT” is set to “PCM ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
D. RANGE COMPRESSION
You can enjoy powerful audio even at a low volume level while playing
Dolby Digital software.
AUTO: Select to apply the effect to multi-channel encoded software.
ON: Select to always use this function.
OTHERS
RESUME
You can select Resume.
ON: The System resumes playback from the position where playback has
been stopped.
OFF: Resume is deactivated.
ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide (see page 12).
DivX REGISTRATION
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code
is recorded, the System’s Registration Code is overwritten for copyright
protection.
text_EN_NXG7G3.indb 46text_EN_NXG7G3.indb 46 08.7.14 11:42:22 AM08.7.14 11:42:22 AM
To Next Page
Loading...
