40
To turn off the sound from the Bluetooth audio
player temporarily
Press Bluetooth SETTING repeatedly to select
“CANCEL?”, then press ENTER/SET.
To resume the sound, press Bluetooth SETTING
repeatedly to select “RECEIVE?”, then press ENTER/
SET.
To change the device to connect
If you have registered several Bluetooth audio players,
select which device is to be connected to the System.
1
RECEIVE ? CANCEL ?
SELECT DV ?
SOUND QLTY?
SYS INFO ?
PAIRING?
DELETE DV ?
CHNG NAME ?
DEVICE A
The name of the current Bluetooth audio player
appears.
2 Select the device to connect.
If a Bluetooth connection cannot be established
Try the following if “CAN’T CNNCT” appears on the
display:
• Set the Bluetooth audio player ready to make
connections (refer to the device’s manual for details),
press Bluetooth SETTING repeatedly to select
“RECEIVE?”, then press ENTER/SET.
Listening to Music Using Bluetooth
Headphones
Pairing
• See “What is pairing?” on page 38.
1 Turn on the Bluetooth headphones and set
it ready to be found by the System.
• See the headphones’ manual for details.
2 Select a source other than “Bluetooth.”
3 Activate Bluetooth transmitter.
Bluetooth
Bt ON
The Bluetooth indicator of the System starts
flashing.
4 Start searching for the headphones.
SEARCHING
SEND ? CANCEL ?
SELECT DV ?
SOUND QLTY?
SYS INFO ?
SEARCH DV ?
DELETE DV ?
CHNG NAME ?
The System starts searching for Bluetooth
headphones.
The name of the first found device is displayed.
Continued on the next page.
or
2 sec
2 sec
text_EN_NXG9G5.indb 40text_EN_NXG9G5.indb 40 08.8.5 10:52:41 AM08.8.5 10:52:41 AM
To Next Page
Loading...
