JVC CD-1770 Service Manual

Main Parts Removing
This
cassette
deck
which
features
a
compact
design
and
high
performance
uses
minuature-sized
parts
which
are
closely
arranged.
Use
special
care
when servicing
it.
Enclosure Assembly
Arrow is shown procedure to
Insert and push remove the cassette lid.
in 4 holes by
small stick. ar
& wer TAC, Cassette *@)
Power switch
knob
Cassette door 1, Press the eject button, then the
cassette door loading upward.
2. Remove the cassette door by pressing
it under side.
Slide volume knobs Pull off it upward.
4Power switch knob
the bracket.
4Eject knob
. Remove the rope on eject knob.
4Select knobs . Remove 2 screws fastening the switch @)
C. board. (EQ & BIAS)
. Remove SW. C. board with it’s
bracket.
. Pull out the select knobs to outer or
inner of the top cabinet.
Remove 6 screws fastening the top cabi-
net, after removing the head cover,
cassette door, botton cover and wood
CD-1770/A/B/C/E
No. 4144 ar oe
e It canbe removed for it’s cleaning
or replacing with other parts un-
removing.
e When replace the cassette door,
insert by pressing it under side,
then one or other side of cassette
door by full locked.
When remove the bottom cover, can
be removed the wood cabinet at as
same.
After removing the bottom cover
only, can be adjusted semi-fixed
resistors (VU meter gain, peak level
and playback gain) on main amp
C. board.
Remove 6 screws fastening the bottom
cover.
When replace the knob, insert knobs
guide plate in score hole of top cabi-
Insert and push in 4 holes near the
power switch by small stick, then can
be removed off the power switch knob.
1. Remove 1 tapping screw fastening
2 earth lugs can be removed as same
the front panel.
cabinet.

JVC CD-1770 Specifications

General

Brand	JVC
Model	CD-1770
Category	Cassette Player
Language	English