JVC DLA-X500RBE - Error Log Data Loading; Fan Switching Temperature Settings

(No.PA048<Rev.002>)1-23
5.3 ERROR LOG (SELF-DIAGONOSIS RECORD AND INDICATION)
5.3.1 Outline
By using the special setting and adjustment software, data related to abnormal operation (history) stored in the projector can be load.
On the basis of contents "LED (INDICATOR) WARNING INDICATONS" set and lamp use time, internal and external temperature,
and ther data prior to the previous usage time can be viewed as a table.
z HOW TO LOAD THE DATA FROM UNIT
(1) Install the software in a personal computer and connect
by RS-232C IN terminal (use cross cable).
(2) Set the projector to stand-by mode.
(3) Start the setting and adjustment software.
(4) Click the [Read Log] button and save the TEXT file. Data
become the latest data so as to go below.
(5) The first number is error code.
(6) Click the [Clean Log] button and delete all data stored in
projector.
zERROR LOG SCREEN ITEMS
zPOWER STATUS
0: STAND-BY MODE
1: POWER ON MODE
2: COOLING MODE
4: EMERGENCY MODE
5.4 Fan switching temperature setting
ERROR CODE
SETUP NUMBER
LAMP TIME(Min)
SYSTEM TIME(Min)
OUTSIDE TEMPERATURE
INSIDE TEMPERATURE
POWER STATUS
NOT USED
F1, 17, 568, 1840, 42, 44, 1, 00, 00
No. Content Error code
1 The lamp don't light 01
2 The lamp turn off 06
3 The lamp cover opening 15
4 Power board occurs error 1A
5 Device Cooling Fan 0D
6 Exhaust Duct Fan 32
7 Lamp Cooling Fan 33
8 Intake Fan 34
9 Exhaust Fan 35
10 DD Fan 36
11 PCS Cooling Fan 37
12 The internal temperature is too high 08
13 The exterior temperature is too high 09
14 PA168 did not start. 10
15 PA168 communication error 11
16 DDM reset 17
17 DDM did not start. 18
18 D-ILA connection 0E
19 Driver IC on DD board did not start. 0F
20 DDM communication error or D-ILA con-
nection
16
21 Other Errors 19
22 VP_FPGA did not start. 1C
23 VP_MCU did not start. 1D
24 VP communication error 1F
25 IF_FPGA did not start. 1E
26 Power-on sequence was not completed. 14
27 Lens barrier occurs error 1B
28 Lamp time warning 02
Highlands Mode Lamp Power
Outside Temperature
[degC]
Low -> High High -> Low
ON High(230W) 38 35
ON Low(172W) 39 36
OFF High(230W) 38 35
OFF Low(172W) 39 36
No. Content Error code