D-ILA projection in 3D*
It is now possible to enjoy the excitement of 3D stereoscopic images in the comfort
of your living room without using a special screen. JVC’s DLA-X7 and DLA-X3 employ
a Frame Sequential 3D method to display left and right images sequentially. A 3D
Synchro Emitter* sends a signal to the 3D Active Shutter eyewear* that synchronizes
the left and right eyewear lenses. This allows the left eye to see only the left frame and
the right eye to see only the right frame. Slight differences in the left and right frames
create the 3D image. The fast response characteristics and picture quality offered by
D-ILA technology allow viewers to enjoy vivid and colorful 3D images with far less
crosstalk or image ghosting. The DLA-X7 and DLA-X3 projectors are compatible with
a variety of 3D formats, including Frame Packing for Blu-ray 3D, Side-by-Side (used
mainly for broadcasting), and Top-and-Bottom.
*Optional 3D Glasses (PK-AG1) and 3D Synchro Emitter (PK-EM1) are required for viewing images in 3D.
Note: Keystone, anamorphic mode, and certain other functions cannot be used while projecting in 3D mode.
Notes about viewing 3D video content
•Theoptional3DSynchroEmitterand3Dglassesarerequiredtoview3D
images from the DLA-X7 and DLA-X3. 3D video software (3D media or output
of 3D broadcasts) and a 3D-compatible video player are also required.
•Perceptionof3Dimageswillvarywithindividualviewers.
•Stopviewing3Dimagesimmediatelyifanydiscomfortsuchasheadaches,
dizziness, eye fatigue, etc. occur.
•Viewingof3Dimagesbychildrenundertheageofveisnotrecommended.
•ReadtheSafetyPrecautionsintheUserManualcarefullybeforeviewingany
3D source.
Add dynamic 3D stereoscopic images, and the excitement begins.
■
Optional equipment
3D Glasses
PK-AG1-B
3D Synchro Emitter
PK-EM1
3D image display
Images for left and right eyes alternate
sequentially at high speed.
For the right eye
For the left eye
1080
1920
To Next Page
Loading...
Need help?
General
