10
Attaching the Stand
The stand installation varies depending on
model. Perform the installation according to the
instructions of your TV model.
Unpacking the TV
Remove TV from the box and place it on a at and
clean surface with TV screen facing down. It is
recommended to place the TV cover or protection
sheet between the TV and the at surface
1 Attach stand to TV and Fasten four (4) screws
provided .
2 Attach base to stand and Fasten three (3) screws
provided.
EM39T (39”)
Removing the Stand
When the TV needs to be transported, remove
the stand and pack the TV back in the carton.
To remove the stand, perform the assemble
steps in reverse order according to your TV
model.
To Next Page
Loading...
Need help?
General
