EasyManua.ls Logo

JVC Everio GZ-HD30 - Gain Up and x.v.Color Settings; Event Registration and Basic Settings

JVC Everio GZ-HD30
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
EN
Changing the Menu Settings (Continued)
Menus (! VIDEO)
Settings: [ ] = Factory-preset
[ GAIN UPGAIN UP
Makes the subject appear bright
automatically when you record in
dark places. However, the overall
color tones appear grayish.
OFF: Deactivates the function.
AGC
: Electrically brightens the scene in dark place.
[AUTO]
: Automatically brightens the scene when it is dark.
(Becomes brighter than [AGC])
X x.v.Color
Records video in the color range
suitable for viewing in an x.v.Color™
compliant TV.
[OFF]: Deactivates the function.
ON
: Activates the function.
NOTE
If you edit videos in MPEG-2 TS format on a computer, set
[x.v.Color] to [OFF] before the recording.
REGISTER EVENT
See page 25.
Y BASIC SETTINGS
[BASIC SETTINGS] menus (Z p. 54)
N
FOCUS ASSIST
When this function is used, the
outline of the focused object is
displayed in the selected color.
RED / GREEN / [BLUE]
o WIND CUT
Reduces noise caused by wind.
[OFF]: Deactivates the function.
ON
: Activates the function.
Y MIC LEVEL
Displays the input level.
OFF: Deactivates the function.
[ON]
: Activates the function.
d
MIC LEVEL SETTING
Increases or decreases the
sensitivity of the microphone.
–2 to +2
NOTE
When the external microphone is connected, you can adjust
the sensitivity.
e
HEADPHONE VOL. ADJ.
Adjusts the headphone volume.
Adjust the volume by moving the set lever to £ / ¤, then press
down. Adjust the headphone volume during recording.
+ MONITOR OFF*
Enables you to turn off the backlight
on the monitor temporarily.
* playback mode only
YES: Turn off the backlight. (no display)
[NO]
: Turn on the backlight.
NOTE
To turn on the backlight again, perform any operation such as
zooming.
f
ON-SCREEN DISPLAY*
Displays the icons and date on the
screen.
* playback mode only
OFF: Hides all the text and icons on the screen.
[DISPLAY ALL]
: Displays all the text and icons.
DISPLAY DATE ONLY
: Hides the text and icons and
displays the date only.
DISPLAY DATE 5 SEC
: When the recording date changes
or images are displayed, the date is displayed for
approximately 5 seconds.

Table of Contents

Related product manuals