54
EN
Changing the Menu Settings (Continued)
Y BASIC SETTINGS menus
Settings: [ ] = Factory-preset
a STREAM FORMAT
Selects the recording method for
videos.
[AVCHD]: Sets AVCHD format (recommended).
MPEG-2 TS
: Sets MPEG-2 TS format.
“High-definition Recording Format” Z p. 6
9
LANGUAGE
Sets the display language. (Zp.19)
[ENGLISH]
You have a choice of 23 languages.
:
CLOCK ADJUST
Sets the time. (Zp.19)
DATE / TIME
;
DATE DISPLAY STYLE
Sets the date and time display
format.
DATE STYLE:
[month.day.year]
/ year.month.day / day.month.year
TIME:
24h / [12h]
\ MONITOR BRIGHT
Sets the brightness of the LCD
monitor.
Adjust the brightness of the display by moving the set lever
to £ / ¤, then press down.
C MONITOR BACKLIGHT
Enables you to adjust the brightness
of backlight on the monitor.
BRIGHTER: Brightens the backlight on the monitor
regardless of the surrounding conditions.
STANDARD
: Select this when saving the battery life.
[AUTO]
: The brightness will automatically be set
to [BRIGHTER] when using outdoors and to
[STANDARD] when using indoors. (when using the
battery pack)
^ DROP DETECTION
Prevents damage to the HDD by
turning off the power automatically
when it is detected that the camera
dropped.
OFF: Deactivates the function.
[ON]
: Activates the function.
To turn on the camera when the drop detection
worked, close the LCD monitor and open it again.
CAUTION
•
The built-in hard disk of the camera may not be protected
even if the setting is [ON].
•
When recording/playback stops even if the camera is not
dropped, set the setting to [OFF].
[ DEMO MODE
Introduces special features of the
camera when there is no operation
for about 3 minutes during recording
mode.
OFF: Deactivates the function.
[ON]
: Activates the function.
NOTES
•
The demonstration only works when the AC adapter is
connected, not with the battery.
•
If a microSD card is in the camera, demonstration will not
take place even if this mode is set to [ON].
To Next Page
Loading...
