Operation Buttons on Remote Control Unit
.
1
Recording Start/Stop Button
●
Starts/stops video recording.
2
Still Image Button
●
Takes a still image.
3
Zoom Button
●
T: Zooms in
●
W: Zooms out
4
Basic Playback Operations
Operation Button
Description
Playback/Pause
Button
d / e
●
Starts/pauses playback of videos or slide-
shows.
Left Button j
●
Moves the cursor to the left.
●
Performs reverse search during playback.
Right Button i
●
Moves the cursor to the right.
●
Performs forward search during playback.
T Button N
●
Zooms in. (during pause)
●
Turns up (+) the volume during video play-
back.
W Button O
●
Zooms out. (during pause)
●
Turns down (-) the volume during video play-
back.
5
Index Button
●
Stops playback and returns to thumbnail display.
6
Info Button
●
Recording: Displays the remaining time (for video only) and battery
power.
●
Playback: Displays file information such as recording date.
Attaching the Lens Cap (GZ-HD500 only)
To protect the lens, attach the provided lens cap to this unit as shown in
the illustration.
.
CAUTION:
●
Please be careful not to lose the lens cap.
Tripod Mounting
This unit can be mounted on a tripod. This is useful for preventing cam-
era shake and recording from the same position.
.
●
To prevent this unit from falling off, check the tripod mounting screw
holes and positioning holes on the unit carefully before mounting, and
turn the screws until they are fastened firmly.
CAUTION:
●
To prevent injuries or damages which may result if this unit falls off,
read the instruction manual of the tripod to be used and make sure that
it is securely attached.
Memo:
●
It is recommended to use the tripod when recording in conditions prone
to camera shake (such as in dark places or when zoomed to the tele-
photo end).
●
Set the digital image stabilizer to Z (OFF) when using a tripod for re-
cording.
"Reducing Camera Shake" （A P.23）
Getting Started
18
To Next Page
Loading...
