16
Be sure to confi gure the following 3 settings
before use.
Charging the Battery Pack
1 Set the power/mode switch to OFF.
OFF
(CHARGE)
2 Attach the battery pack.
BATT.
3 Connect the AC adapter.
•
The access/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
fi nished.
Required charging/recording time (approx.)
Battery pack Charging time
Recording
time
BN-VF815U
(Provided)
2 hr. 40 min.
GZ-HD5
1 hr. 25 min.
GZ-HD6
1 hr. 20 min.
BN-VF823U 3 hr. 50 min.
GZ-HD5
2 hr. 05 min.
GZ-HD6
2 hr. 00 min.
8 To detach the battery pack
Slide and hold BATT. (step 2), then remove
the battery pack.
8 To check the remaining battery power
See page 23.
NOTES
•
You can also use the camera with just the
AC adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)
Necessary Settings before Use
To Next Page
Loading...
