JVC Everio GZ-HD6 - DPOF Print Setting

41
ENGLISH
DPOF Print Setting –
#
mode only
The number of prints to make of a still image
recorded on a microSD card can be set. This
feature is useful when taking the microSD
card to a photo lab for printing.
Preparation:
•
Select
#
mode.
•
Select the playback mode.
•
Set [REC MEDIA FOR IMAGE] to [SD].
( p. 68)
Setting Files Individually
1
FUNCTION
2 Select [DPOF].
Select
Set
EFFECT
DPOF
MOVE
COPY
PROTECT
DELETE
3 Select [SELECT IMAGES].
Select
Set
DPOF
CHECK SETTINGS
RESET
ALL 1
SELECT IMAGES
SELECT
SET QUIT
4 Select the desired fi le.
Select
Set
DPOF TOTAL: 0
8/8
SELECT
SET QUIT
If you slide and hold the zoom lever
towards T, the preview screen of the still
image is displayed.
5 Select the number of prints (max.
15 prints).
Select
Set
To set print information for other images,
repeat steps 4 and 5. (You can set up to
999 fi les.)
6
F
U
N
C
TI
O
N
8 To exit the screen
Press the FUNCTION button.
8 To cancel the selection
Set the number of prints to “00” in step 5.
8 To confi rm DPOF settings
In step 3, select [CHECK SETTINGS].
•
If necessary, change the number of prints
for the desired fi le by following steps 4
and 5.
8 To reset DPOF settings
1) In step 3, select [RESET].
2) Select [EXECUTE].