48
Using a VCR/DVD Recorder to Dub
Files from the Camera
Preparation:
•
Set [SWITCH TO ANALOG I/O] to
[OUTPUT].
(Factory-preset = [OUTPUT]) (p. 65)
•
Turn off all units.
You can also connect the cables using the
jacks on the Everio dock connectors.
The S-Video or DV cable (optional) enables
even higher dubbing quality. (p. 10)
When other devices such as a DVD burner
are connected to the Everio dock, turn the
power of these devices off.
1
Set the VCR/DVD recorder to its AUX
input mode.
2
Start playback on the camera.
•
To play back videos (p. 28)
•
To play back playlists
(“When dubbing playlists using a VCR/
DVD recorder” : p. 39)
3
At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder’s
instruction manual.
L To stop dubbing
Stop recording on the VCR/DVD recorder,
then press the START/STOP button again.
NOTE
To record only the date information among the
display indications, set [DISPLAY ON TV] to
[ON], and touch the OK button until date/time
indication appears. (p. 67)
AC Adapter
To AC
Outlet
DC Jack
AV Jack
AV Cable
AV Input Jack
VCR/DVD Recorder
Copying Files (Continued)
To Next Page
Loading...
