JVC Everio GZ-MS130 - Dubbing to VCR;DVD Recorder; Analog Dubbing Procedure via AV Connectors; Hiding Screen Display During Dubbing

EN34
Dubbing Files to a VCR/DVD Recorder
Preparation:
•
Create a playlist.
•
Turn off all units.
L To connect using the AV connectors
(analog dubbing)
1
Open the LCD monitor to turn on the
camcorder.
2
Set the VCR/DVD recorder to its AUX
input mode.
Check that the images from the camcorder
are input correctly to the VCR/DVD
recorder.
3
Play back playlists on the camcorder.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the first and
the last scene.)
4
At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder’s
instruction manual.
L To stop dubbing
Stop recording on the VCR/DVD recorder.
L To hide the date or icons on the screen
Change the settings in [DISPLAY ON TV].
VCR/DVD
Recorder
DC
Connector
AV Connector
(Input)
To AC
Outlet
AV Cable
AV Connector
AC
Adapter
Copying Files (Continued)
GZ-MS130BU_US_IB_ENB.indb 34GZ-MS130BU_US_IB_ENB.indb 34 4/28/2008 11:44:25 AM4/28/2008 11:44:25 AM