What to do if my JVC Everio GZ-MS110 Camcorder recording stops by itself?
If your JVC Camcorder stops recording automatically, try turning the unit off, waiting a short time, and then turning it back on. The unit may be shutting down to protect the circuit from overheating. Also, be aware that recording will automatically stop after 12 hours of continuous recording.
What to do if my JVC Everio GZ-MS110 Camcorder displays 'RECORDING FAILURE'?
If your JVC Camcorder shows a 'RECORDING FAILURE' message, try turning the unit off and then on again.
Why does the POWER/CHARGE lamp blink on my JVC Everio GZ-MS110 when the monitor is closed?
The POWER/CHARGE lamp may blink on your JVC Camcorder when the monitor is closed for a few reasons. Check the remaining battery power; the lamp will not flash when the battery pack is fully charged. Also, when charging in a hot or cold environment, ensure the battery is being charged within the permitted temperature range; otherwise, charging may stop to protect the battery pack.
General| Digital zoom | 800 x |
|---|---|
| Optical zoom | 39 x |
| Focal length range | 2.2 - 85.8 mm |
| Sensor type | CCD |
| Total megapixels | 0.8 MP |
| Optical sensor size | 1/6 \ |
| Display diagonal | 2.7 \ |
| Auto focus | Yes |
| Power consumption (typical) | 1.5 W |
| Image formats supported | JPG |
| USB 2.0 ports quantity | 1 |
| Compatible memory cards | SD, SDHC |
| Product color | Black |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 52 mm |
| Height | 62 mm |
| Weight | 195 g |
To Next Page
