To Next Page

To Previous Page

Setting Backlight Compensation

You can correct the image when the subject appears too dark due to

backlight.

Press MENU to display the menu.

Select “MANUAL SETTING” with the ZOOM/SELECT lever and press

OK.

Select “BACKLIGHT COMP.” and press OK.

Select “ON” and press OK.

Setting Metering Area

You can set the brightness of a specified area as the standard.

Press MENU to display the menu.

Select “MANUAL SETTING” with the ZOOM/SELECT lever and press

OK.

Select “METERING AREA/ TYPE” and press OK.

Select “SPOT” and press OK.

●

When “SPOT” is selected, select the position of the spot frame by

pressing the +/- buttons.

After selecting, press OK to confirm.

Recording

Other manuals for JVC Everio GZ-MS110

Questions and Answers:

Need help?

Do you have a question about the JVC Everio GZ-MS110 and is the answer not in the manual?

General