EN5
Date/Time Setting
Q
Open the LCD monitor to
turn on the camcorder
R
Select [YES] within
10 seconds
T
Power Button
S
Select [CLOCK SETTING]
•
When the message disappears, press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
Select the city closest to
the area where you use
the camcorder
U
Select [ON] if daylight
saving time is effective.
LCD monitor
SET
SET DATE/TIME!
YES
NO
Slide your finger up and down on
the sensor. Then touch OK.
SET
QUIT
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
CLOCK ADJUST
SET THE CITY, DATE AND TIME
AREA SETTING
SET
QUIT
NOV.1.2009 04:55PM
R
SET
QUIT
SET FOR DAYLIGHT SAVING TIME
SET DAYLIGHT SAVING TIME
NOV.1.2009 04:55PM
OFF
DAYLIGHT SAVING TIME (DST)
V
Set the date and time
CLOCK SETTING
DATE TIME
GMT+ 9:00
NOV 1 2009 4 55 PM
SAVE
QUIT
Touch sensor: Sets the date and time
}: Moves the cursor to the right
OK: Clock starts
GZ-MS130BU_US_IB_ENB.indb 5GZ-MS130BU_US_IB_ENB.indb 5 4/28/2008 11:44:01 AM4/28/2008 11:44:01 AM
To Next Page
Loading...
Need help?
General