27
7 When a disc is played back
1 Slide the remote control
mode selector to DVD.
2 Press 8.
• To return to normal playback, press 3
(play).
7 When a disc is paused
1 Slide the remote control
mode selector to DVD.
2 Press 8 repeatedly.
7 When a disc is played back
1 Slide the remote control
mode selector to DVD.
There are two methods in step 2.
2 Press 1 or ¡.
• Each time you press the button, the speed
increases. To restore the normal speed,
press 3 (play).
Hold down PREVIOUS 4 or
NEXT¢.
• Fast reverse/fast forward search can be used
only while the button is pressed.
NOTE
• For some discs, sound is intermittent or no sound will
be produced during fast reverse/fast forward search.
• The selectable speeds and displays vary by the disc
type.
Pausing playback
Advancing the picture
frame by frame
(only for moving image)
Fast reverse/fast forward
search
Messages displayed on the TV when the power is turned on
The following messages appear depending on the status of the DVD player.
Appears when the DVD player is reading the disc information. Wait for a while.
Appears when the Region Code of the DVD does not match the code the DVD
player supports. (A page 49)
Appears when no disc is loaded.
Appears when the disc tray is opening.
Appears when the disc tray is closing.
Appears when an unplayable disc is attempted to be played back.
NOW READING
REGION CODE
ERROR!
NO DISC
OPEN
CLOSE
CANNOT PLAY THIS
DISC
Basic operations of the DVD player (continued)
EXA10[B].book Page 27 Thursday, August 4, 2005 10:01 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
