20
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass –6 (min.) — +6 (max.)
(Bass)
TRE Adjust the treble –6 (min.) — +6 (max.)
(Treble)
FAD Adjust the front and rear speaker R6 (rear only) — F6 (front only)
(Fader)* balance
BAL Adjust the left and right speaker L6 (left only) — R6 (right only)
(Balance) balance
LOUD Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Adjusting the sound
You can adjust the sound characteristics to your preference.
Note:
* If you are using a two-speaker system, set the fader level to “00”.
2
Adjust the level.
Press the + button to increase the level or turn on the loudness
function, and the – button to decrease the level or turn off the
loudness function.
Note:
Normally the + and – buttons work as the volume control buttons. So
you do not have to select “VOL” to adjust the volume level.
(Loudness)
ON — OFF
2
1
SEL
EN.19-21KS-FX740R/640/540R[E]/F 98.11.6, 3:39 PM20
To Next Page
Loading...
