- 10 -
KEY FUNCTIONS
1. MENU
Activates and exits the OSD.
2. SOURCE/▼
Select input source, and move the OSD menu.
3. AUTO/▲
Move the OSD menu and auto adjustment of RGB source.
4. ◀
◀◀
◀ (VOL)
Decrease the level of volume and select and set the OSD menu.
5. ▶
▶▶
▶
Increase the level of volume and select and set the OSD menu.
6. /I
Turns the power ON or OFF. There will be a few seconds delay before the display appears.
The power LED(next to the power switch) lights with green when the power is turned ON.
The power is turned off by pressing the power switch again and the power LED goes Red.
7. LED LENSE
To Next Page
Loading...
Need help?
General
