EN
ENEN
EN
%
%%
%
Master Page: Right
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to
the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the
cap is flush to the camcorder.
● During shooting
How To Attach The Strap
1
Following the illustration, thread the strap
through the eyelet a.
2
Fold it back and thread it through the buckle b.
3
Repeat the procedure to attach the other end of
the strap to the other eyelet c located under the
Grip Strap.
4
Confirm the strap is not twisted.
GR-D200US.book Page 7 Friday, April 11, 2003 1:05 PM
To Next Page
Loading...
