I DubbingToAVCR
To AV connect_
Audio/Video _ Open the cover.
cable
(provided)_
D
D Yellow to VIDEO IN
Red to AUDIO R IN
D White to AUDIO L IN
1 Following the illustrations, connect the
camcorder and the VCR's input connectors.
2 Start playback on the camcorder. ( pg. 20)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
• To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to AUTO", ON" or "OFF".
( pg. 22, 27)
• Time code
Set "TIME CODE" to OFF" or ON".
( pg. 22, 27)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF". LCD" or "LCD/
TV". ( pg, 22.27)
To Next Page
Loading...
