36 EN
PLAYBACK
Advanced Connections
Connection To A Personal
Computer
This camcorder can transfer still images to a PC with a DV
connector-equipped capture board installed.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the DV
cable as shown in the illustration.
3
Turn the camcorder’s Power Switch to “ ” while
pressing down the Lock Button located on the switch
and turn on the PC.
NOTES:
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
墌
pg. 9).
●
The date/time information cannot be captured into the
PC.
●
Refer to the manufacturer’s instruction manual for the
DV connector-equipped capture board.
●
When using a DV cable, be sure it has a core filter
attached. The core filter reduces interference.
To DV
IN/OUT
DV cable
(optional)
To DV
connector
Power Switch
PC with DV
connector-equipped
capture board
Core filter
Connector
cover
Core filter
To Next Page
Loading...
