60 EN
USING THE REMOTE CONTROL UNIT
(cont.)
FEATURE:
Playback Zoom
PURPOSE:
To magnify the recorded image up to 40X at any time
during playback.
OPERATION:
1) Press PLAY (
4
) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a
particular portion of the picture. While holding
down SHIFT, press (Left), (Right), (Up) and
(Down).
To end zoom, press and hold W until magnification
returns to normal. Or, press STOP (5) and then press
PLAY (
4
).
NOTES:
●
Zoom can also be used during slow-motion and still
playback.
●
Due to digital image processing, the quality of the
image may suffer.
Remote sensor
Down Button
Up Button
Press T
Normal playback
To move image, press
(Right) while keeping
SHIFT held down.
SHIFT
Left Button
Right Button
Zoom Buttons
PLAY
STOP
To Next Page
Loading...
