38 EN
IN UTS/AV P
COPY
OFF
OFF
–
–
IN UTPS/AV
COPY
YMEMOR
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
STEREO–
SOUND
1
SP
–
–
–
NRETUR
O.O
RE NEON SC LCD / TV
UAOT
IMETDATE /
T I ME CODE
–
–
–FFO
NRETUR
BEEP
MELODY
NO
TALLY
–
–
ID N MUBER
DEMO MODE
–60
–NO
CAM ERSET
NRETUR
MSYSTE
AYDISPL
VIDEO SOUND MODE
MODE
MODE
12
BIT
SYNC ROH
REC
END
For Playback Menu
The following procedure applies to all except
Synchro
Comp (
pg. 50).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select the desired
function menu, and press it. The selected function
menu appears.
4
Rotate the MENU/BRIGHT wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6
Rotate the MENU/BRIGHT wheel to select
“
1
RETURN” and press it twice to close the Menu
Screen.
Display
Power
Switch
MENU/BRIGHT Wheel
Lock Button
Recording Start/Stop Button
NOTES:
●
It is also possible to change the ON SCREEN settings by pressing DISPLAY on the remote control (provided).
●
“REC MODE” can be set when the Power Switch is set to “ ” or “ ” (
pg. 14, 35).
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)
Menu Screen Explanations
pg. 39.
pg. 39.
pg. 50.
Allows you to set the recording
mode (SP or LP) depending on your
preference ( pg. 14).
It is recommended you use “REC
MODE” in the “ VIDEO” Menu
when using this camcorder as a
recorder during digital dubbing
( pg. 41).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
VIDEO
DISPLAY
SYSTEM
Each setting is linked with “ DISPLAY” or “
SYSTEM”, which appears when the Power Switch
is set to “ ” ( pg. 36, 37).
The parameters are the same as in the description
on pg. 36, 37.
To Next Page
Loading...
