40 EN
DUBBING
Connector
cover**
To AV
To S
S-Video
cable
(optional)
Power Switch
Dubbing To A VCR
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 22 and 23.
2
Set the camcorder’s Power Switch to “ ” while
pressing down the Lock Button located on the switch,
turn on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
Engage the VCR’s AUX and Record-Pause modes.
4
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4
/6 on the camcorder.
5
Press
4
/6 on the camcorder and engage the VCR’s
Record mode.
6
Engage the VCR’s Record-Pause mode and press
4
/6
on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
VCR
TV
Audio/Video cable
[mini-plug to RCA plug]
(provided)
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
To AUDIO, VIDEO*
and
-IN connectors
“Y/C”/“CVBS”
video out select
switch
Cable Adapter
(provided)
If your VCR has a
SCART connector, use
the provided cable
adapter.
NOTES:
●
As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and
the AUX channel for dubbing purposes.
●
Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they
are being recorded onto the new tape.
●
Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen ( pg. 38).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen (
pg. 38).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 38). Or, press DISPLAY on the
remote control (provided).
●
You can use Playback Zoom (
pg. 45) or Playback Special Effects (
pg. 44) in step 5.
To Next Page
Loading...
