EN5
•AC Power Adapter/
Charger AA-V20ED or
AA-V20SH
•Remote Control
Unit RM-V711U
•Battery Pack BN-V214U
•Lithium Battery CR2025
(for remote control unit)
TW
•Shoulder Strap
•Audio/Video (A/V) Cable
[RCA plug to RCA plug]
PROVIDED ACCESSORIES
•Core Filter
(for optional DV cable)
•Core Filter (for provided editing
cable or optional JLIP cable*)
12 3
How to Attach The Core Filter
Attach the provided Core Filter to the provided editing cable, optional DV cable or optional JLIP cable.
The Core Filter reduces interference.
1.
Release the
stoppers on both
ends of the Core
Filter.
2.
Run the cable through the Core Filter, leaving
approx. 3 cm of cable between the cable
plug and the Core Filter. Wind the cable
around the outside of the Core Filter as
shown in the illustration.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
3.
Close the Core Filter until it
clicks shut.
Connect the end of the cable
with the Core Filter to the
camcorder.
3 cm
Stopper
Editing cable and JLIP cable:
Wind once.
DV cable: Wind twice.
•PC Connection Cable
*Necessary for use with the provided software.
•Editing Cable
•CD-ROM
The CD ROM contains the following
5 software programmes:
• JLIP Video Capture
• JLIP Video Producer
Presto!
• Mr. Photo
• PhotoAlbum
• ImageFolio
•DC Cord
•S-Video Cable
To Next Page
Loading...
Need help?
General
