64 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9.
Snapshot mode cannot be
used.
10.
The color of Snapshot looks
strange.
11.
Digital Zoom does not work.
12.
Program AE with special
effects and Fade/Wipe Effects
do not work.
13.
The Black & White Fader
does not work.
14.
The Dissolve function does
not work.
15.
The Picture Wipe and
Dissolve functions do not
work.
9.
• The Squeeze mode is
selected.
• Digital Zoom is used.
10.
• The light source or the subject
does not include white. Or
there are various different light
sources behind the subject.
11.
• 10X optical zoom is selected.
• The Video Echo mode is
activated.
• Picture Wipe or Dissolve are
being used in a scene
transition.
• 5-Second recording was
done with the Power Switch
set to “5S”, and with “5SD”
selected in the System Menu.
12.
• The Operation Switch is set to
“ ” and/or the Power Switch
is set to “5S”.
13.
• The Sepia or Monotone mode
is activated.
14.
• The Sepia, Monotone or Slow
Shutter mode of Program AE
with special effects is
activated.
• The Squeeze mode is
selected.
• The previously selected mode
of Program AE with special
effects was changed after the
last selected scene for editing
was registered.
15.
• The last selected editing scene
is ending.
• At the end of the last selected
scene for editing, the Power
Switch was set to “OFF”.
• The power is off.
9.
• Disengage the Squeeze mode
(Z pg. 29).
10.
• Find a white subject and
compose your shot so that it
also appears in the frame
(Z pg. 26).
11.
• Turn off the Video Echo mode
(Z pg. 35).
• Wait until the Picture Wipe or
Dissolve effects are
completed (Z pg. 31 – 33).
• Change the setting of either
the System Menu or the
Power Switch (Z pg. 24).
12.
• Set the Operation Switch to
“ ” and/or set the Power
Switch to “ ”.
13.
• Turn off Sepia and Monotone
(Z pg. 34).
14.
• Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
(Z pg. 34).
• Make sure that the Squeeze
mode in the Recording Menu
is set to “OFF” (Z pg. 29).
• Make sure you have selected
the mode of Program AE with
special effects you want before
starting editing (Z pg. 34).
15.
• Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically activated
(Z pg. 32).
• Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (Z pg. 32).
• The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-
Standby mode. Make sure
you continue operations
within 5 minutes after
engaging Record-Standby
mode (Z pg. 32).
To Next Page
Loading...
Need help?
General
