EN103
LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording
W
H
MODE5S
32kHz
SOUND
444
REC
LP 35 min
PAUSE
6w
PS
TC
12 : 34 : 24
E01
TAPE !
160XSET DATE / TIME !
0 L PHOTO
1/250
25 . 12 . 99
16 : 40
MANUAL
A
– – – – –
6
– – – – –
BRIGHT
0
1* 3 6542
8
9
7
@
!
%
$
#
0*
200X
D
T
W
^
a
b
No. Function
1* Displays the operation mode position. (Z pg. 17)
2 Appears when backlight compensation is used. (Z pg. 48)
3 Appears when Auto Slow Shutter is engaged (“GAIN UP” is set to “AUTO”). (Z pg. 37)
4 Appears when Digital Image Stabilizer (“DIS”) is engaged. (Z pg. 37)
5 Appears when “FLASH” is set to “AUTO ” in the Mode Menu. (Z pg. 32)
6 Appears when the flash is ready. A number appears next to the indication after adjusting
the brightness of the flash. (Z pg. 32, 33)
7 Appears when taking a Snapshot. (Z pg. 22, 30)
8 Appears during Self-Timer recording. (Z pg. 29)
9 Displays the brightness of the LCD monitor or the viewfinder. (Z pg. 21)
0* Displays the date/time. (Z pg. 11, 38)
! Appears when the iris is locked. (Z pg. 49)
@ Appears when the focus is adjusted manually. (Z pg. 47)
# Appears when the exposure is adjusted. (Z pg. 48)
$ Appears when the white balance is adjusted. (Z pg. 51)
% Displays the selected Program AE with special effects. (Z pg. 44)
^ Appears during zooming. (Z pg. 24)
Zoom level indicator
Approximate zoom ratio
* :Setting “INDICATION” to “OFF” in the Date/Time Menu lets you remove indications marked with * from the screen
(Z pg. 27).