JVC GR-DVX70A

EN27
LCD Monitor/Viewfinder Indications
You can make the LCD monitor/Viewfinder indications
appear/disappear.
1
SELECT OPERATION MODE
Set the Operation Switch to “ ”. Then, set the
Power Switch to “ ”, “5S” or “ ” while
pressing down the Lock Button.
2
ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS MODE MENU
Move the highlight bar to “TO MODE MENU” by
rotating MENU/SET. Press it and the Mode Menu
appears.
4
ACCESS DATE/TIME MENU
Move the highlight bar to “TO DATE/TIME MENU”
by rotating MENU/SET. Press it and the Date/Time
Menu appears.
5
SELECT FUNCTION
Move the highlight bar to “INDICATION” by rotating
MENU/SET, then press it.
6
SET FUNCTION PARAMETERS
Cycle through the available settings of the selected
functions by rotating MENU/SET and stop when the
one you want is displayed.
OFF: To make the indications disappear.
ON: To make the indications appear.
Then press it and the highlight bar automatically
moves to “RETURN”.
7
CLOSE RECORDING MENU
Press MENU/SET twice. Selection is complete and the
menu disappears.
NOTES:
● It is impossible to make the tape running indicator
“ 444 ” and warnings etc. disappear from the LCD
monitor or the viewfinder. For the indications that can
be removed, Z pg. 102, 103.
● If “INDICATION” is set in the Date/Time Menu,
“INDICATION” in the Playback Menu will also be set to
the same setting ( Z pg. 55).
A M
ON SCREEN OFF
ONDISPLAY
INDICATION ON
4
DATE / TIME
25 . 12 . 99
16 : 40
RETURN
DATE/TIME
OFF
FLASH ADJ.
P. AE
/ EFFECT
END
0
4
– – – – –6– – – – –
4
TO DATE / TIME MENU
TO SYSTEM MENU
END
OFF
AUTO
FLASH
GAIN UP AGC
SELF-TIMER
TO MODE MENU
P
L
A
Y
/
P
C
O
F
F
C
A
M
E
R
A
5
S
D
S
C
D
S
C
P
L
A
Y
Display
MENU/SET Dial Power Switch
Mode Menu
Date/Time Menu
Power lamp
Recording Menu
Lock Button
Operation Switch