82 EN
USING THE REMOTE CONTROL UNIT
(cont.)
TW
P
L
A
Y
/
P
C
O
F
F
C
A
M
E
R
A
5
S
D
S
C
D
S
C
P
L
A
Y
Press TNormal playback
Left or SLOW
Rewind Button
To move image,
press
(Right)
while keeping
SHIFT held down.
RM-V713U
(provided)
PAUSE
Power Switch
PLAY
Zoom Buttons
SHIFT
Stop (5) Button
Play (
4
) Button
Remote sensor
FEATURE:
Slow-Motion Playback
PURPOSE:
To allow slow-speed search in either direction during
video playback.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
PAUSE (6) at the point where you want to start
playback in slow motion.
2) Press SLOW (
9
or
0
). After playing back for approx.
1 minute in Slow Rewind or approx. 2 minutes in Slow
Forward, normal playback resumes.
n To stop Slow-Motion Playback in progess, press PLAY (
4
).
NOTES:
●
During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
●
After SLOW
(
9
or
0
)
is pressed, the still image may be
displayed for a few seconds, then the screen may become
blue back for a few seconds. This is not a malfunction.
●
There may be a small margin between the slow-motion
playback start point you chose and the start point at which
the camcorder actually begins playback in slow motion.
●
During Slow-Motion Playback, there will be distur-
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunc-
tion.
●
During Slow-Motion Playback, press PAUSE
(6)
to
pause playback.
FEATURE:
Frame-By-Frame Playback
PURPOSE:
To allow frame-by-frame search during video playback.
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
press PAUSE (6) at the point where you want to start
Frame-By-Frame Playback.
2) Press PAUSE (6) repeatedly. Each time it is pressed, the
frame is played back.
FEATURE:
Playback Zoom
PURPOSE:
To magnify the recorded image up to 10X at any time
during video playback.
OPERATION:
1) Press PLAY (
4
) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a
particular portion of the picture. While holding down
SHIFT, press (Left), (Right), (Up) and
(Down).
n To end zoom, press and hold W until magnification returns
to normal. Or, press STOP (5) and then press PLAY (
4
).
NOTES:
●
Zoom can also be used during slow-motion and still
playback.
●
During digital image processing, the quality of the
image may suffer.
Right or SLOW
Forward Button
Up Button
Down Button
STOP
To Next Page
Loading...
Need help?
General
