Menus Settings: [ ] = Factory-preset
CONNECTION SETTINGS
Select [CONNECTION SETTINGS], then select sub-menus.
%
DISPLAY ON TV
Displays camcorder’s on-screen
display on a TV screen.
[OFF]: Does not display on TV.
ON: Displays on TV.
R
VIDEO OUTPUT
Sets the aspect (16:9/4:3) to the
screen of the connected television
when outputting videos from the AV
connector.
4:3 / [16:9]
S
COMPONENT OUTPUT
Sets the definition of the video
output from the COMPONENT
connector.
[576i]: Outputs at 576i.
1080i: Outputs at 1080i.
T
HDMI OUTPUT
Sets the definition of the video output
from the HDMI mini connector.
[AUTO 1]: It is recommended to select [AUTO 1] usually.
AUTO 2: Select when the video is not projected in
[AUTO 1] correctly.
576p: Select when the video is not projected in [AUTO 2]
correctly.
NOTE
When connecting to a 1080p compatible TV, set [HDMI
OUTPUT] to [AUTO 1]. When this is set, “1080P” appears
at the top of the LCD monitor.
HDMI CONTROL
Selects whether you use the linked
operations with the TV, when you
connect the TV using the HDMI mini
connector.
OFF: Turns off the linked operations.
[ON]: Turns on the linked operations.
To Next Page
Loading...
