How to troubleshoot a JVC GZ-HD320 Camcorder that has no power?
If your JVC Camcorder isn't powering on, make sure the AC adapter is correctly connected and that the battery pack is adequately recharged.
Why is the battery display incorrect on my JVC Camcorder?
If the JVC Camcorder is used for extended periods in very high or low temperatures, or if the battery pack is repeatedly charged, the remaining battery display may not be correct. To resolve this, fully charge the battery pack, let it completely discharge, and then recharge it again.
What to do if I cannot find a recorded video on my JVC GZ-HD320 Camcorder?
If you cannot find a recorded video on your JVC Camcorder: * Select [PLAYBACK OTHER FILE] then search the video on the index screen. Note that video files that have damaged management information can be played back this way. * Ensure that group display and date search functions are canceled. * Verify the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA FOR IMAGE] is correct, as files on other media will not be displayed.
What to do if my JVC GZ-HD320 is not recording?
If your JVC Camcorder is not recording, slide the mode switch to select the desired mode (! or #).
Why does my JVC GZ-HD320 Camcorder operate slowly?
If your JVC Camcorder operates slowly when switching between video and still image modes, or when powering on or off, it may be due to a large number of files on the camcorder. Copy all files from the camcorder to your computer, and then erase the files from the camcorder.
Why doesn't the lamp flash when charging my JVC GZ-HD320 battery?
The lamp on your JVC Camcorder might not flash during battery pack charging if the battery pack is already fully charged. Also, when recharging in a hot or cold environment, ensure the battery is being charged within the permitted temperature range. Recharging may stop to protect the battery pack if the battery pack is being recharged outside the permitted temperature range.
Why does my JVC GZ-HD320 Camcorder recording stop by itself?
If your JVC Camcorder recording stops by itself, it might be due to a few reasons. The camcorder's temperature may be too high, causing it to protect the HDD; in this case, turn off the camcorder, wait, and try recording again. Excessive sound or vibration could also be a factor; try moving away from the disturbance. A malfunction in the HDD could also be the cause, so try recording to a microSD card instead. You can do this by inserting a microSD card and setting both [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD]. Also, note that recording automatically stops after 12 hours of continuous use.
How to fix JVC GZ-HD320 Camcorder when no power is supplied?
If your JVC Camcorder isn't getting power, ensure the AC adapter is correctly connected and that the battery pack is recharged. Try these steps to resolve the issue.
Why is the remaining battery display not correct on my JVC GZ-HD320?
If the remaining battery display on your JVC Camcorder isn't correct, especially after using it in very hot or cold conditions, or after repeatedly charging the battery pack, fully charge the battery, let it run down completely, and then recharge it again. This may help recalibrate the battery display.
What to do if image or sound does not appear on TV properly when connecting JVC GZ-HD320 to the HDMI cable?
If the image or sound doesn't appear properly on your TV when connecting your JVC Camcorder with an HDMI cable, try these steps: First, disconnect the HDMI cable and then reconnect it. If that doesn't work, turn off and then turn on the camcorder again.
Instructions on charging the battery pack for the camcorder.
Steps to set the camcorder's date and time, including daylight saving.
Steps to start and stop video recording, including mode selection.
Steps to select playback mode, choose a file, and start playback.
Covers warnings about fire, shock, moisture, handling, and power connections.
Details on handling, charging, and safety of the replaceable lithium battery.
Steps to charge the battery pack for the camcorder.
Steps to set the camcorder's date and time, including daylight saving.
Steps for video recording, including mode selection and starting/stopping.
Steps for capturing still images, including focus and shutter.
How to switch from auto to manual recording mode.
Guide to resolve common problems with power, display, and recording.
Solutions for problems related to recording, playback interruptions, and file access.
Troubleshooting for camcorder operation, battery charging, and file transfer errors.
Detailed warnings about handling, charging, and storing the battery pack.
Warnings and advice for safe handling and operation of the main camcorder unit.
Guidelines to prevent corruption or damage to recorded data on media.
Precautions for preventing damage and prolonging the life of the LCD monitor.
To Next Page
General
