JVC GZ-HD320 - Accessories; Preparing the Remote Control

14
EN
Accessories
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area To Reinsert the Battery
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
Pull out the battery holder by pressing the lock
tab.
Effective distance:
Max. 5 m
Remote Sensor
Lock Tab
Lithium Battery
(CR2025)
AP-V20M
BN-VF808U
AC Adapter Power Cord Battery Pack Component Cable
RM-V751U
CR2025
AV Cable USB Cable Remote Control Lithium Battery
Pre-installed in the
remote control.
CD-ROM
NOTE
Make sure to use the provided cables for connections. Do not use any other cables.