JVC GZ-MC200 User Manual

EN 19
BASIC OPERATIONS
MasterPage: Heading0_Right
BASIC OPERATIONS
To turn on the camera, set the power switch to or
while pressing down the lock button located on the switch.
● The power/charge lamp turns on.
To turn off the camera, set the power switch to OFF.
Set the appropriate operation mode according to your
preference using the power switch, MODE and e ()
buttons.
1 Power Switch Position
Set the power switch for recording ( ) or playback ( )
while pressing down the lock button.
2 Recording/Playback Mode
Press MODE to select the recording/playback mode.
The selected mode lamp lights up.
: Video mode (墌 pg. 20, 21)
: Still image mode (墌 pg. 22, 23)
: Voice mode (墌 pg. 24)
3 Auto/Manual Mode
Press e ( ) to switch the auto/manual recording
mode. When manual mode is selected, the indicator
appears on the LCD monitor.
Operation Mode
Power/Charge Lamp
Power Switch
MODE
Lock Button
Mode Lamp
1
2
3
e ()
Power Switch
Playback
Recording
Power off
Auto mode:
You can record using no special effects or
manual adjustments.
Manual mode:
Manual recording is possible by setting
various functions.
GZ-MC200PAL.book Page 19 Tuesday, November 30, 2004 2:31 PM

JVC GZ-MC200 Specifications

General

Digital zoom	200 x
Optical zoom	10 x
Sensor type	CCD
Total megapixels	2.12 MP
Optical sensor size	1/3.6 \
Interface	USB 2.0
Resolution	1600 x 1200 pixels
Media types supported	Microdrive/CompactFlash Type II card, SD
Display diagonal	1.8 \
Built-in microphone	Yes

Weight and Dimensions

Weight	355 g