JVC GZ-MC200 User Manual

BASIC OPERATIONS
EN 23
BASIC OPERATIONS
MasterPage: Basic_Right
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select .
● A still image is displayed.
● To switch the medium to be played back, see pages 26 and
27.
3 Press 3 to display the previous file. Press 5 to
display the next file.
To turn on/off the on-screen display / To check the file
information
Press INFO repeatedly.
To select the file on the index display
Slide the zoom lever to W so that the index display
appears. Then press rtw e to select the file and press
49.
NOTES:
● Images shot and stored on the recording media with another
device may not be played back correctly.
● You can zoom in/out or rotate still images. For details, read
the advanced operation manual. (墌 pg. 32)
You can playback all the images stored in recording media
automatically.
1 Perform steps 1 – 2 in the left column.
2 Press 49 to start the slide show.
● If you press t during the slide show, files are displayed
in descending order.
● If you press r during the slide show, files are displayed
in ascending order.
● To end the slide show, press 49 again.
Deleting Still Image Files
Press , then press rt to select [EXECUTE] and press
49.
● You can select the desired file to be deleted by pressing w
e.
● To delete multiple files at once, see pages 26 and 29.
Still Image Playback
Zoom Lever
Power
Switch
Lock Button
35
49
MODE
INFO
Slide Show
To display the next
image
To display the
previous image
Slide Show
Normal Playback
GZ-MC200PAL.book Page 23 Tuesday, November 30, 2004 2:31 PM

JVC GZ-MC200 Specifications

General

Digital zoom	200 x
Optical zoom	10 x
Sensor type	CCD
Total megapixels	2.12 MP
Optical sensor size	1/3.6 \
Interface	USB 2.0
Resolution	1600 x 1200 pixels
Media types supported	Microdrive/CompactFlash Type II card, SD
Display diagonal	1.8 \
Built-in microphone	Yes

Weight and Dimensions

Weight	355 g