JVC GZ-MC200 - Page 31

MENU SETTINGS
EN 31
MENU SETTINGS
MasterPage: Menu_Right
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select or .
3 Press and hold e ( ) so that is displayed.
4 Press t ( SET). The menu screen appears.
5 Press w e to select the desired sub menu.
6 Press 49. The sub menu appears.
7 Press rt (or we) to select the desired menu item.
8 Press 49 again. Selection is complete.
● To return to the normal screen, press t ( SET).
[ ] = Factory-preset
[AUTO*] or [±0**] / ±6* or ±2 (EV)**
Fine exposure adjustment is possible depending on the
shooting condition.
* For video recording
** For still image recording
[AUTO] / (manual)
If correct focus may not be obtained depending on the
shooting condition, use the manual focus mode.
[AUTO] / MWB / FINE / CLOUD / HALOGEN
You can adjust the white balance setting manually or
select an option.
[AUTO] / 1/2 / 1/4 / 1/8 / 1/15 / 1/30 / 1/50 / 1/120 / 1/250
1/500 / 1/1000* / 1/2000* / 1/4000*
You can select the shutter speed depending on the
subject and shooting condition.
* Not available for still image recording. If the flash is used, 1/500
is also not available.
[OFF] / SPORTS / SNOW / SPOTLIGHT / TWILIGHT
Various programmed effects can be added to the scene.
[OFF] / SEPIA / MONOTONE / CLASSIC FILM /
STROBE
Creative effects can be added to the image.
Menus for Manual Recording
(MSET Menu)
Lock
Button
w
t ( SET)
e ()
49
MODE
Power
Switch
r
EXP.
FOCUS
WB
SHUTTER
P. AE
EFFECT
GZ-MC200PAL.book Page 31 Tuesday, November 30, 2004 2:31 PM