What to do if the focus is not adjusted automatically on JVC GZ-MG364?
If the focus on your JVC Camcorder isn't adjusting automatically, set the [FOCUS] to [AUTO]. Also, try cleaning the lens and then check the focus again.
What to do if recording cannot be performed on JVC GZ-MG364 Camcorder?
If your JVC Camcorder is unable to record, it might be because the recording medium is full. Try deleting unnecessary files or replacing the microSD card. Also, ensure that you have selected the correct recording medium.
Why during recording date/time does not appear on JVC Camcorder?
To display the date/time during recording on your JVC Camcorder, touch the DISP button once.
Why does JVC Camcorder remaining battery power differ from actual time?
If the displayed amount of remaining battery power differs from the actual operating time on your JVC Camcorder, fully charge the battery and then run it down. If the problem persists, the battery is likely worn out and needs to be replaced. Please purchase a new one.
What to do if JVC Camcorder image is displayed for a long time during video playback?
If the same image is displayed for a long time during video playback on your JVC Camcorder, or if the motion is choppy: * Replace the microSD card (as damage to the card's surface can cause difficulty in reading data). * Clean up or format the microSD card.
What to do if JVC Camcorder power does not turn on or battery life is short?
If your JVC Camcorder doesn't turn on or the battery life is very short, ensure you're using it within appropriate operating temperatures. Also, the battery might be worn out and need replacement; consider purchasing a new one.
What to do if JVC Camcorder power was turned off accidentally?
If your JVC Camcorder's power turned off accidentally: * Move to a place less affected by vibration or excessive sound. * The drop detection function may have operated. Close the LCD monitor and open it again. To disable this function, set [DROP DETECTION] to [OFF].
What to do if JVC GZ-MG364 Camcorder has no display?
If no display appears on your JVC Camcorder: * If the camera isn't operated for 5 minutes while on, it turns off to save power. To turn it back on when using the battery, close and reopen the LCD monitor. When using the AC adapter, perform any operation like zooming. * Adjust the brightness of the LCD monitor.
What to do if JVC GZ-MG364 aspect ratio of the image is strange on TV?
If the aspect ratio of the image appears strange when watching images from your JVC Camcorder on TV, change the settings in [SELECT TV TYPE] to match the image's aspect ratio with the screen size of the connected TV.
What to do if JVC Camcorder touch sensor does not function?
If the touch sensor on your JVC Camcorder does not function, make sure to touch the sensors with your finger. The sensors won't work if you touch them with your fingernail or while wearing gloves.
General| Video Format | MPEG-2 |
|---|---|
| Image Sensor | CCD |
| Digital Zoom | 800x |
| Image Stabilizer | Electronic |
| Display Type | LCD |
| Microphone Operation Mode | Stereo |
| Sensor | CCD |
| Image Format | JPEG |
| Screen Size | 2.7 inches |
| Focus Adjustment | Auto, Manual |
| Shooting Programs | Spotlight, sports mode, portrait mode, snow |
| White Balance | Auto, Manual |
| White Balance Presets | Daylight |
| Connector Type | USB |
| Included Accessories | USB cable, AV cable, shoulder strap |
| LCD Screen Pixels | 123, 000 pixels |
| Interface | USB |
Identifies the camcorder models (GZ-MG364, GZ-MG344, GZ-MG334).
Covers preparation, recording, and playback steps for initial use.
Critical safety measures for mains power connection and battery handling.
Guidelines for safe operation and product disposal.
How to interact with controls and view information on screen.
Essential configurations like battery charging and date/time.
Procedures for capturing video and still images.
Viewing recorded content and connecting to a television.
Operations on recorded files like deletion and protection.
Transferring files to PC (Windows and Macintosh).
Resolving operational problems and errors.
Product details, recording modes, and alerts.
Information on obtaining help and technical assistance.
To Next Page
