JVC GZ-MG575AA - Backlight Compensation; Manual Setting in Function Menu; Spot Exposure Control

22
Backlight Compensation
Backlight compensation brightens the subject
by increasing the exposure.
Preparation:
Set the program AE dial to 3 (manual
recording mode).
N
N
16:9
8 To cancel backlight compensation
Move the set lever to ¡ ( - ) twice so that
the - indicator disappears.
Spot Exposure Control
Use this function when backlight
compensation does not work well, or to adjust
the brightness in the desired spot.
Preparation:
Set the program AE dial to 3 (manual
recording mode).
1 Move twice.
N
16:9
2 Select the desired spot metering area
frame.
Select
Set
16:9
[5h56m]
N
8 To lock the exposure
After you fi nish confi guring the setting,
press and hold the set lever for more than 2
seconds. The
C
indicator appears.
8 To cancel spot exposure control
Move the set lever to ¡ (
- ) once so that
the
. indicator disappears.
Manual Setting in Function Menu
You can use manual recording functions
easily by selecting items in the function
menus.
Preparation:
Set the program AE dial to 3 (manual
recording mode).
1
FUNCTION
ADJUST BRIGHTNESS
EFFECT
WB
2 Select the desired menu.
For details on each menu, see page 23.
Select
Set
ADJUST BRIGHTNESS
AUTO
0
3 Select the desired setting.
Select
Set
ADJUST BRIGHTNESS
AUTO
0
Depending on the kind of settings you
select, you can set the value by moving the
set lever to ¡ / ¢ after selecting.
4
FUNCTION
16:9
2
N
The menu disappears and the indicator for
the set function appears.
8 To return to the previous screen
Move the set lever to £.
8 To exit the screen
Press FUNCTION.
Manual Recording (Continued)
GZ-MG575AA_EN.indb 22GZ-MG575AA_EN.indb 22 3/3/2007 8:40:30 AM3/3/2007 8:40:30 AM