Other Settings
Using
a microSO Card
The camcorder is programmed to record
on
the built-in hard disk when it is shipped from
the factory.
You
can change the recording
medium to microSD card.
• Operations are confirmed on the following
microSD cards.
- Panasonic
- TOSHIBA
- SanDisk
-
ATP
Video recording:
Class 4 or higher compatible microSDHC
card (4 GB to 8 GB)
Still image recording:
microSD card (256 MB to 2 GB) or
microSDHC card (4 GB to 8 GB)
• If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
• MultiMediaCards are not supported.
IInsert a microSD card
Preparation:
Close the LCD monitor to turn off the
camcorder.
1 Open
the
microSD
card
cover.
2
Firmly
insert
the
card
with
its
clipped
edge
first.
3
Close
the
microSO
card
cover.
18
EN
•
To
remove a microSD card
Push the microSD card once.
After the card comes out a little, pull it out.
1mB
• Insert and remove the microSD card only
while the power is turned off. Otherwise, data
on the card may be corrupted.
• Do not touch the terminal on the reverse side
of the label.
IChange the recording medium
Set [REC MEDIA FOR VIDEO]
and
[REC
MEDIA FOR IMAGE]
to
[SO].
Format a microSD card when using it for
the
first
time
Select
[FORMAT
SO
CARD]
to
format
the
card.
To Next Page
Loading...
