•
To
quit the screen
Select [QUIT].
•
To
return to the previous screen
Select !:J.
Changing the Menu Settings
1 Touch MENU.
2 Select the desired menu.
3 Select the desired setting.
Troubleshooting
Before requesting service, consult
the
following chart. If
the
solutions indicated in the
chart
do
not solve
the
problem, consult your
nearest
JVC
dealer
or
JVC
service
center
for
instructions.
Refer
also
to
the
FAQ
of
new
products on
JVC's website.
The following phenomena are not
malfunctions.
• The camcorder heats
up
when it
is
used for a
long time.
• The battery heats up during charging.
• When playing back a video, the image stops
momentarily or the sound
is
interrupted at
junctions between scenes.
• LCD monitor momentarily become
red
or
black when sunlight
is
recorded.
• Black spots, or red, green, or blue spots
appear
on
the LCD monitor.
(The LCD monitor contains 99.99% effective
pixels, but
0.01
% of fewer pixels may
be
ineffective.)
• Connect the
AC
adapter correctly.
• Recharge the battery pack.
• Fully charge the battery pack, run it down, and then recharge it
again.
• If the camcorder is used for long periods of time
in
high or low
temperatures, or if the battery pack is repeatedly charged, the
amount of remaining battery may not be displayed correctly.
• The LCD monitor may be difficult to see if used
in
bright areas
such as under direct sunlight.
EN
37