3
EN
Date/Time Setting
Q
Open the LCD monitor to
turn on the camcorder
Power button
LCD monitor
S
Select [CLOCK SETTING]
T
Select the city closest to
the area where you use
the camcorder
U
Select [ON] if daylight
saving time is effective
R
Select [YES] within
10 seconds
•
When the message disappears, press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
•
Touch the sensors with your fi nger. The
sensors do not function if you touch them
with your fi nger nail or with gloves on.
Slide your fi nger up and down on the
sensor. Then touch OK.
V
Set the date and time
Touch sensor: Sets the date and time
&
: Moves the cursor to the right
OK: Clock starts
To Next Page
Loading...
