EasyManua.ls Logo

JVC HM700U - Camcorder - 1080p - Basic Menu Operations; Using Menu Operation Buttons

JVC HM700U - Camcorder - 1080p
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Playback
For deleting clips.
Note :
Clips appended with OK marks cannot be deleted on the
camera recorder.
Read-only clips can be deleted on a PC.
Deleting One Clip
You can delete a selected clip with any of the following
operations.
A Press [USER2] button when menu is not displayed.
B Perform [Delete Clip...]B[One Clip] in thumbnail menu.
Memo :
A clip cannot be deleted with the [USER2] button and menu
operation ([Delete Clip...]
B
[One Clip]) under the following
situations.
A clip with OK mark is selected.
Write-protect switch of the SDHC card is set ( is
displayed).
During Thumbnail Screen
Deleting with [USER2] button
1 Select the clip to delete.
Select the clip to delete with the cross-shaped button
(
JKHI).
2 Press the [USER2] button.
A screen to confirm deletion appears.
3 Use the cross-shaped button (JK) to select [Delete]
and press the Set button (
R)
Deleting starts.
Memo :
Button operations are unavailable during deletion. The
deleting operation cannot be canceled.
The cursor moves to the next clip (or previous clip if a next
clip does not exist) after deletion.
Deleting with [Delete Clip...]B[One Clip] in the
menu
1 Select the clip to delete.
Select the clip to delete with the cross-shaped button
(
JKHI).
2 Press the [MENU] button.
The thumbnail menu screen appears.
3
Select [Delete Clip...]
B
[One Clip] and press the Set
button.
A screen to confirm deletion appears.
Deleting Clips
[CANCEL] Button
[USER2] Button
[MENU] Button
Set Button (
R)
Cross-
Shaped
Button
(
JKHI)
1
3
1

Table of Contents

Related product manuals