JVC HM700U - Camcorder - 1080p - Specifications

122
Others
General
Camera Section
Lens Section (GY-HM700U/GY-HM700E
only)
Storage Section
Video/Audio
Terminal Section
Specifications
Power : DC 12 V (10.5 V to 17 V)
Power
consumption
: Approx. 23 W
(During recording [when the camera
recorder + standard lens + LCD monitor
are in use])
Mass
GY-HM700CHU : Approx. 2.4 kg
GY-HM700CHE : Approx. 2.6 kg
GY-HM700U : Approx. 3.4 kg
GY-HM700E : Approx. 3.6 kg
Allowable
operating
temperature
: 0 I to 40 I (32 J to 104 J)
Allowable
operating
humidity
: 30 % to 80 % RH
Allowable storage
temperature
: -20 I to 60 I (-4 J to 122 J)
Image pickup device : 1/3" Progressive IT CCD
Color separation
prism
: F1.4, 3-color separation prism
Sync system : Internal sync (built-in SSG)
Lens mount : 1/3" bayonet system
Optical filter : OFF, 1/4, 1/16
Gain : 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB,
ALC
Electronic shutter : 1/6 to 1/10000, EEI
Variable scan : 10/30-60/30fps, 10/25-50/25fps, 10/24-
60/24fps
LCD monitor : 4.3" LCD, 800 x 480 (WVGA, 410,000
pixels)
Viewfinder : 0.45" LCOS, 1.22 megapixels
(852 x 480 x 3)
Lens : Canon F/1.6, 14x, f = 4.4-61.6 mm (35 mm
conversion: 32-448 mm)
Filter diameter : 82 mm
Supported media : SDHC (Class 6)
Slots : x 2
Recording time : Approx. 25 minutes (8 GB SDHC card,
35 Mbps, VBR mode)
: Video : MPEG-2 Long GOP
HQ mode : VBR, 35Mbps(Max) MPEG-2 MP@HL
SP mode : CBR, 25Mbps (1440x1080i)/19Mbps
(1280x720p) MPEG-2 MP@H14
: Audio
: LPCM 2ch, 48 kHZ/16 Bit
Video frame rate
: NTSC settings
HQ mode : 1920x1080/59.94i, 29.97p, 23.98p,
1440x1080/59.94i (MOV only),
1280x720/59.94p, 29.97p, 23.98p
SP mode : 1440x1080/59.94i, 1280x720/59.94p,
29.97p, 23.98p
: PAL setting
HQ mode : 1920x1080/50i, 25p, 1440x1080/
50i(MOV only), 1280x720/50p, 25p
SP mode : 1440x1080/50i, 1280x720/50p, 25p
[Y/VIDEO], [PB], and [PR] analog video output terminals
Analog composite output (480i or 576 i: Downconverted, 4:3/16:9)
: 1.0 V (p-p), 75 K, BNC (unbalanced)
Component output (720p /1080i)
: Y: 1.0 V(p-p), 75 K
Pb, Pr: 0.7 V(p-p), 75 K, BNCx3
(unbalanced)
[HD/SD-SDI] output terminal (480i or 576i : Downconverted / 720p
/1080i: embedded audio), BNC (unbalanced)
HD-SDI : Compliant with SMPTE 292 M
SD-SDI : Compliant with SMPTE 259 M
[AUDIO INPUT 1/2] terminal
[MIC] : -60 dBu, 3 kK, XLR (balanced),
+48 V output (phantom power
supply)
[LINE] : +4 dBu, 10 kK, XLR (balanced)
[AUDIO OUTPUT] terminal
: -8 ±1 dBu (when audio signal
process output is -20 dB), 1 kK, RCA
x2 (unbalanced)
[PHONES] terminal : 3.5 mm mini jack (stereo) x 2
[REMOTE] terminal : 6-pin JVC remote control connection
[IEEE1394] terminal : 4-pin
[USB] terminal : Mini USB-B type, USB 2.0, miniB,
slave function (mass storage class)
only