To Next PageTo Next PageWhy does “#”, “” and “$” on the front display panel won’t stop blinking on JVC DVD VCR Combo?
If “#”, “” and “$” on the front display panel won’t stop blinking on your JVC DVD VCR Combo, it means that the end of the tape was reached during timer recording. The program may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire program.
Why does “N”, “” and “$” on the front display panel won’t stop blinking on JVC DVD VCR Combo?
If “N”, “” and “$” on the front display panel won’t stop blinking on your JVC DVD VCR Combo, it could be because the Satellite Auto Recording mode is engaged but there is no cassette loaded, the loaded cassette has had its record safety tab removed, or the end of the tape was reached during Satellite Auto Recording. Load a cassette with the record safety tab intact, remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact. Next time make sure you have enough time on the tape to record the entire program.
What does it mean when “#” on the front display panel won’t stop blinking on JVC DVD VCR Combo?
If “#” on the front display panel won’t stop blinking on your JVC DVD VCR Combo, it indicates that the timer is engaged but there’s no cassette loaded, or the loaded cassette has had its record safety tab removed. Load a cassette with the record safety tab intact, or remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact.
How to fix tape-to-tape editing if it is not possible on JVC DVD VCR Combo?
If tape-to-tape editing is not possible on your JVC DVD VCR Combo, confirm that the source (another video recorder, camcorder) is properly connected, all necessary power switches are turned on, and the input mode is set to “F-1”.
How to fix camcorder recording if it is not possible on JVC DVD VCR Combo?
If camcorder recording isn't working on your JVC DVD VCR Combo, confirm that the camcorder is properly connected and the input mode is set to “F-1”.
Why does my JVC HR-XVC27U say 'REGION CODE ERROR!'?
If the disc's region number doesn't match the unit, use discs with region number 'ALL' or '1'.
What to do if recording cannot be started on JVC DVD VCR Combo?
If you cannot start recording on your JVC DVD VCR Combo, it may be because there is no cassette loaded, or the cassette loaded has had its record safety tab removed. Insert a cassette, or cover the hole where the tab was removed using adhesive tape.
Why is timer recording not working on my JVC DVD VCR Combo?
If timer recording isn't working on your JVC DVD VCR Combo, it could be due to incorrect clock or timer settings, or the timer might not be engaged. Re-perform the clock and/or timer settings, and press TIMER to confirm that “#” is displayed on the front display panel.
What to do if the disc cannot be played back on JVC DVD VCR Combo?
If your JVC DVD VCR Combo won't play a disc, there might be several reasons. First, ensure the disc's region code includes "ALL" or "4" to match the unit. Second, check if the disc type is supported. Third, remove the disc and place it properly in the disc tray. Finally, the Parental Lock might be engaged; either release it temporarily or change the set level.
Why is tape-to-tape editing not possible on my JVC DVD Player?
Tape-to-tape editing might be impossible on your JVC DVD Player due to several reasons: * The source (another video recorder, camcorder) might not be properly connected. Confirm that the source is properly connected. * All necessary power switches might not be turned on. Make sure all units’ power switches are turned on. * The input mode might be incorrect. Set the input mode to 'F-1'.
General| Brand | JVC |
|---|---|
| Model | HR-XVC27U |
| Category | DVD Player |
| Language | English |
Covers essential safety precautions for product use and electrical hazards.
Details safety rules for installation, grounding, power, and ventilation.
Covers safe usage, cleaning, heat, servicing, and damage risks.
Addresses moisture condensation, mobile phones, and placement advice.
Explains playable/unplayable discs, region codes, and disc file organization.
Provides instructions on loading, handling, and caring for discs.
Identifies and explains buttons, indicators, and ports on the front of the unit.
Details the various input and output connectors on the rear of the unit.
Explains the operation and features of the remote control unit.
Guides on connecting the unit to the TV via RF or AV.
Instructions for S-VIDEO connection for DVD.
Instructions for Component Video connection for DVD.
Automatic clock and tuner channel setup process.
Guides on selecting the appropriate monitor type for DVD playback.
Procedures for setting on-screen language for VCR and DVD decks.
Guides on setting the clock and tuning channels manually or semi-automatically.
Steps for loading a cassette and starting playback.
Details on still picture, slow motion, search, and playback controls.
Covers basic recording, timer, express timer, and satellite recording.
Instructions for loading discs and starting DVD playback.
Covers navigating menus, search, audio, subtitle, angle, and picture settings.
Guides on playing MP3 and JPEG files from discs.
Procedures for editing from camcorders and other recorders.
Steps for dubbing DVD to VCR and digital audio transfer.
Instructions for connecting to audio decoders or amplifiers.
Explains picture control, sound monitor, and timer settings for VCR.
Covers resume function, parental lock, and scan mode settings for DVD.
Guides for resolving power, tape transport, and playback problems on VCR.
Solutions for DVD, MP3, JPEG playback, and recording errors.
Addresses other system issues and frequently asked questions.
Provides detailed technical data for general components and the tuner.
Lists technical details for the VCR and DVD deck sections.
